T2003 liquid crystal thermostatic controller is applicable to industrial use, commercial use and indoor temperature regulation of civil building. With the product, the indoor temperature is set via the button. It has a large liquid crystal screen display. The NTC (negative temperature coefficient) temperature sensor in the temperature controller can detect the room temperature and compare it with the set one to regulate the cold and hot air inlet and open or close the electric valve of the pipe, so as to maintain the room temperature. Its operation mode includes automatic, cooling and heating, which can be automatically switched between cooling or heating according to the difference of water temperature. It can control many types of electric valves.
The time switch could be set in different periods.
The blower has three speeds available.
Interface could be locked with pass word.
It has collection function of the temperature deviation.
Sleeping mode is available (optional), providing a cozy environment and saving energy.
Infrared remote receiver is accessed. Remote control unit is available (optional).
It keeps memory of the data even after the power off, which makes it restore its operation after the power resumption.
The blower speed could be regulated both automatically and manually.
Cold-resistance function will be launched under the low temperature.
Backlight function is optional.
Rs485 function and ModbusRTU protocol are available. LonWorks function is selected.
Temperature/humidity sensor is embedded outside and inside. (Optional)
It has floating output signal function. (Optional)
0-10V or 4-20mA input and output. (Optional)